Shack–Hartmann wavefront sensing: A new approach to time-resolved measurement of the stress intensity factor during dynamic fracture

The stress intensity factor describes the stress state around a crack tip in a solid material and is important for understanding crack initiation and propagation. Because stresses cannot be measured directly, the characterization of the stress intensity factor relies on the measurement of deformation around a crack tip. Such measurements are challenging for dynamic fracture of brittle materials where the deformation is small and the crack tip velocity can be high. Digital gradient sensing (DGS) is capable of full-field measurement of surface deformation with a sub-micrometer sensitivity and a sub-microsecond temporal resolution, but it has only been demonstrated on centimeter-scale specimens with a spatial resolution of ∼ 1 mm. This makes it challenging to measure deformations close to the crack tip. Here, we demonstrate the potential of Shack–Hartmann wavefront sensing (SHWFS), as an alternative to DGS, for measuring surface deformation during dynamic brittle fracture of millimeter-scale specimens. Using an opaque commercial glass ceramic as an example material, we demonstrate the capability of SHWFS to measure the surface slope evolution induced by a propagating crack with a micrometer spatial resolution and a sub-microsecond temporal resolution. The SHWFS apparatus has the additional advantage of being physically more compact than a typical DGS apparatus. We interpret our SHWFS measurements of the surface slope by comparing them with 2D analytical predictions and phase-field simulations as well as 3D linear-elastic FEM simulations, based on which we discuss the relevance of 3D effects around the crack tip. Then, we introduce our procedure for extracting the apparent stress intensity factor associated with the propagating crack tip using SHWFS measurements. We conclude by discussing potential future enhancements of this technique and how its compactness could enable the integration of SHWFS with other characterization techniques including x-ray phase-contrast imaging (XPCI) for multi-modal characterization of dynamic fracture.