Natural abundance-level measurement of the nitrogen isotopic composition of oceanic nitrate: An adaptation of the ammonia diffusion method

D. M. Sigman, M. A. Altabet, R. Michener, D. C. McCorkle, B. Fry, R. M. Holmes

Research output: Contribution to journalArticlepeer-review

406 Scopus citations

Abstract

We have adapted the 'ammonia diffusion' method of nitrate extraction for natural-abundance level nitrogen isotopic measurement of oceanic nitrate. The method involves: (1) sample concentration (by boiling or evaporation); (2) conversion of nitrate to ammonia using Devarda's alloy; and (3) the gas-phase diffusion of ammonia onto an acidified glass fiber disk which is sandwiched between two porous Teflon membranes. We have investigated the conditions necessary to effect complete ammonia recovery from natural seawater samples and the use of Devarda's alloy under these conditions. In addition, we have characterized the blanks in this method and designed a protocol to minimize them. Here, we report our protocol for nitrate extraction from seawater and provide an explanation of the protocol based on our method development work. To demonstrate the performance of the method, we present nitrate nitrogen isotopic data from nitrate standard additions to Sargasso Sea surface water and from several Southern Ocean depth profiles. The nitrate extraction method gives highly reproducible, complete recovery of nitrate and a standard deviation for isotopic analysis of <0.2‰ down to 5 μM nitrate (or lower). Replicate extractions of a nitrate standard added to Sargasso Sea surface water demonstrate agreement between the isotopic composition of the added and recovered N, with the extraction blank causing a ≤0.3‰ discrepancy for 5 μM nitrate. The blanks inherent in the extraction procedure are from Devarda's alloy and seawater dissolved organic nitrogen ('DON'). The N blank of the Devarda's alloy reagent depends on brand and lot number. The Devarda's alloy which we are currently using results in a blank of ~0.4 nmol N per 100 ml of seawater (effectively 0.4 μM). An isotopic correction is made for this blank. For standard incubation conditions, stored Woods Hole seawater (with ~ 10 μM DON) gives a ~ 0.6 μM DON blank, while stored Sergasso sea (with ~ 6 μm DON) surface water gives a DON blank of 0.3-0.5 μM. The DON blank appears to cause the ≤0.3‰ difference between the measured and actual isotopic composition of nitrate added to Sargasso Sea surface water at the 5 μM nitrate level. We discuss several ways to lower the DON blank for samples in which the DON concentration is high relative to the nitrate concentration. The nitrogen isotopic data from several Southern Ocean profiles, in conjunction with the other results presented in this paper, demonstrate the consistency of the data produced by the ammonia diffusion method. The ammonia diffusion-based protocol is more reliable and allows for better precision than the nitrate reduction/ammonia distillation method (Cline and Kaplan, 1975) in our hands. While the samples have an incubation time of 4 days or longer, we find that the diffusion method allows for higher throughput than the distillation method because samples can be run conveniently in large batches.

Original languageEnglish (US)
Pages (from-to)227-242
Number of pages16
JournalMarine Chemistry
Volume57
Issue number3-4
DOIs
StatePublished - Jul 1997
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Oceanography
  • General Chemistry
  • Environmental Chemistry
  • Water Science and Technology

Keywords

  • Isotopes
  • Nitrate ion
  • Nitrogen
  • Seawater

Fingerprint

Dive into the research topics of 'Natural abundance-level measurement of the nitrogen isotopic composition of oceanic nitrate: An adaptation of the ammonia diffusion method'. Together they form a unique fingerprint.

Cite this