Modeling of high harmonic fast wave scenarios for NSTX Upgrade

NSTX-Upgrade will operate with toroidal magnetic fields (B_T) up to 1 T, nearly twice the value used in the experiments on NSTX, and the available neutral beam injection (NBI) power will be doubled. The doubling of BT while retaining the 30 MHz RF source frequency has moved the heating regime from the high harmonic fast wave (HHFW) regime used in NSTX to the mid harmonic fast wave regime. By making use of the full wave code AORSA (assuming a Maxwellian plasma), this work explores different HHFW scenarios for two possible antenna frequencies (30 and 60 MHz) and with and without NBI. Both frequencies have large electron absorption for large wave toroidal number particularly without NBI. With the presence of NBI, the fast ions absorption can be dominant in some scenarios. Therefore, a competition between electron and fast ion absorption is clearly apparent partially explaining why in previous NSTX HHFW experiments, a less efficient electron heating was observed. Moreover at the toroidal field of 1 T, a direct thermal ion damping might be possible under the condition when the ion temperature is larger than electron temperature. In general, the electron and ion absorption are found very sensitive to the ratio of electron and ion temperature. The impact of the hydrogen species is also studied showing that, for hydrogen concentration below 2%, the hydrogen absorption is not significant. However, a larger hydrogen concentration could open up new HHFW heating scenarios in NSTX-U. Launching at high toroidal wave number appears to be one way to significantly reduce the ion damping and in turn to obtain large electron damping in the core which can play an important role in the transport studies for NSTX-U. Finally, an higher magnetic field could also playing a role in increasing the electron temperature and consequently the electron absorption. Indeed a magnetic field scan is also shown and discussed.