TY - JOUR
T1 - Determining effective wellbore permeability from a field pressure test
T2 - A numerical analysis of detection limits
AU - Gasda, Sarah E.
AU - Nordbotten, Jan M.
AU - Celia, Michael Anthony
N1 - Funding Information:
Acknowledgments This work was sponsored in part by a grant from BP and Ford Motor Company through funding of the Carbon Mitigation Initiative at Princeton, and by the National Science Foundation through a graduate fellowship to S. E. Gasda. We also thank Stefan Bachu of the Alberta Geological Survey for his important contributions to this work.
Copyright:
Copyright 2008 Elsevier B.V., All rights reserved.
PY - 2008/5
Y1 - 2008/5
N2 - We propose a simple pressure test that can be used in the field to determine the effective permeability of existing wellbores. Such tests are motivated by the need to understand and quantify leakage risks associated with geological storage of CO2 in mature sedimentary basins. If CO 2 is injected into a deep geological formation, and the resulting CO2 plume encounters a wellbore, leakage may occur through various pathways in the "disturbed zone" surrounding the well casing. The effective permeability of this composite zone, on the outside of the well casing, is an important parameter for models of leakage. However, the data that exist on this key parameter do not exist in the open literature, and therefore specific field tests need to be done in order to reduce the uncertainty inherent in the leakage estimates. The test designed and analyzed herein is designed to measure effective wellbore permeability within a low-permeability caprock, bounded above and below by permeable reservoirs, by pressurizing the reservoir below and measuring the response in the reservoir above. Alternatively, a modified test can be performed within the caprock without directly contacting the reservoirs above and below. We use numerical simulation to relate pressure response to effective well permeability and then evaluate the range of detection of the effective permeability based on instrument measurement error and limits on fracture pressure. These results can guide field experiments associated with site characterization and leakage analysis.
AB - We propose a simple pressure test that can be used in the field to determine the effective permeability of existing wellbores. Such tests are motivated by the need to understand and quantify leakage risks associated with geological storage of CO2 in mature sedimentary basins. If CO 2 is injected into a deep geological formation, and the resulting CO2 plume encounters a wellbore, leakage may occur through various pathways in the "disturbed zone" surrounding the well casing. The effective permeability of this composite zone, on the outside of the well casing, is an important parameter for models of leakage. However, the data that exist on this key parameter do not exist in the open literature, and therefore specific field tests need to be done in order to reduce the uncertainty inherent in the leakage estimates. The test designed and analyzed herein is designed to measure effective wellbore permeability within a low-permeability caprock, bounded above and below by permeable reservoirs, by pressurizing the reservoir below and measuring the response in the reservoir above. Alternatively, a modified test can be performed within the caprock without directly contacting the reservoirs above and below. We use numerical simulation to relate pressure response to effective well permeability and then evaluate the range of detection of the effective permeability based on instrument measurement error and limits on fracture pressure. These results can guide field experiments associated with site characterization and leakage analysis.
UR - http://www.scopus.com/inward/record.url?scp=43149103898&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=43149103898&partnerID=8YFLogxK
U2 - 10.1007/s00254-007-0903-7
DO - 10.1007/s00254-007-0903-7
M3 - Article
AN - SCOPUS:43149103898
SN - 0943-0105
VL - 54
SP - 1207
EP - 1215
JO - Environmental Geology
JF - Environmental Geology
IS - 6
ER -