TY - GEN
T1 - A Fast visible camera Divertor-imaging diagnostic on DIII-D
AU - Roquemore, A. L.
AU - Maingi, R.
AU - Lasnier, C. J.
AU - Nishino, N.
AU - Evans, T. E.
AU - Fenstermacher, M. E.
AU - Nagy, A.
PY - 2007
Y1 - 2007
N2 - In recent campaigns, the Photron Ultima SE fast framing camera has proven to be a powerful diagnostic when applied to imaging divertor phenomena on the National Spherical Torus Experiment (NSTX). Active areas of NSTX divertor research addressed with the fast camera include identification of types of EDGE Localized Modes (ELMs)[1], dust migration, impurity behavior and a number of phenomena related to turbulence. To compare such edge and divertor phenomena in low and high aspect ratio plasmas, a multi-institutional collaboration was developed for fast visible imaging on NSTX and DIII-D. More specifically, the collaboration was proposed to compare the NSTX small type V ELM regime[2] and the residual ELMs observed during Type I ELM suppression with external magnetic perturbations on DIII-D[3]. As part of the collaboration effort, the Photron camera was installed recently on DIII-D with a tangential view similar to the view implemented on NSTX, enabling a direct comparison between the two machines. The rapid implementation was facilitated by utilization of the existing optics that coupled the visible spectral output from the divertor vacuum ultraviolet UVTV system, which has a view similar to the view developed for the divertor tangential TV camera[4]. A remote controlled filter wheel was implemented, as was the radiation shield required for the DIII-D installation. The installation and initial operation of the camera are described in this paper, and the first images from the DIII-D divertor are presented.
AB - In recent campaigns, the Photron Ultima SE fast framing camera has proven to be a powerful diagnostic when applied to imaging divertor phenomena on the National Spherical Torus Experiment (NSTX). Active areas of NSTX divertor research addressed with the fast camera include identification of types of EDGE Localized Modes (ELMs)[1], dust migration, impurity behavior and a number of phenomena related to turbulence. To compare such edge and divertor phenomena in low and high aspect ratio plasmas, a multi-institutional collaboration was developed for fast visible imaging on NSTX and DIII-D. More specifically, the collaboration was proposed to compare the NSTX small type V ELM regime[2] and the residual ELMs observed during Type I ELM suppression with external magnetic perturbations on DIII-D[3]. As part of the collaboration effort, the Photron camera was installed recently on DIII-D with a tangential view similar to the view implemented on NSTX, enabling a direct comparison between the two machines. The rapid implementation was facilitated by utilization of the existing optics that coupled the visible spectral output from the divertor vacuum ultraviolet UVTV system, which has a view similar to the view developed for the divertor tangential TV camera[4]. A remote controlled filter wheel was implemented, as was the radiation shield required for the DIII-D installation. The installation and initial operation of the camera are described in this paper, and the first images from the DIII-D divertor are presented.
KW - DIII-D
KW - ELMs
KW - Fast camera
UR - https://www.scopus.com/pages/publications/47749115338
UR - https://www.scopus.com/pages/publications/47749115338#tab=citedBy
U2 - 10.1109/FUSION.2007.4337940
DO - 10.1109/FUSION.2007.4337940
M3 - Conference contribution
AN - SCOPUS:47749115338
SN - 1424411947
SN - 9781424411948
T3 - Proceedings - Symposium on Fusion Engineering
BT - Proceedings of the 22nd IEEE/NPSS Symposium on Fusion Engineering - SOFE 07
T2 - 22nd IEEE/NPSS Symposium on Fusion Engineering - SOFE 07
Y2 - 17 June 2007 through 21 June 2007
ER -